 |
||
 Concrete Removal and Prep Tool Grind concrete with your standard duty floor buffer (200 rpm max), without fear of damaging your machine. Because the direction of rotation pulls the diamonds across the surface, danger from catching on a crack or expansion joint is eliminated.
Designed with a replaceable latch “blade” concept to easily change used or worn down blades by simply replacing each individual blade. DB.CNC.13.100 |
Mastic Tool Removes stubborn coatings such as tile glue and mastic, thin set, thin mil expoxies, urethanes and paint. DB.MAS.13.25 |
|
 Hardwood Tool You can use your standard duty floor buffer (200 rpm max), without fear of damaging your machine. Because the direction of rotation pulls the diamonds across the surface, danger from gapped boards or cut outs such as heater vents catching the tool are eliminated. Diamonds are 50 grit and used primarily to remove hard surface finishes. Subsequent sanding should start at 60 grit or coarser. DB.HDW.15.50 |
A revolutionary way to polish with your floor buffer (200 rpm max). Yes, now you can achieve a polished surface without the expense of the large polishing machines. By starting with the Concrete Prep tool, work your way down through all of the grits (wet or dry). You can get a concrete floor to have a beautiful luster. To enhance the luster, use of a concrete densifier is recommended. With diamonds embedded in a polymer matrix, the system provides the cutting and polishing characteristics of diamonds without high pressure, high speed or high cost. 100 Grit 200 Grit 400 Grit 1000 Grit 2000 Grit |
|
