BRONCO 260P.G2

What’s new with the G2?

 

It just wasn't enough being the fastest, most maneuverable, ride-on floor stripper on the market. Taylor Tools has made several changes to this latest generation of the propane powered ride-on stripper making it more durable and easier to maintain than ever before. 

More made battery and redesigned control levers with milled high strength aircraft aluminum and steel components to reduce the chance of lever breakage

 

External Oil Check and Dipstick Access Port:

 

The dip stick has been conveniently relocated to allow the operator to easily check the oil level and top off if necessary.  

 

 

 

 

 

 

 

Externally Mounted Air Filter:

 

The air filter, which ensures optimum motor performance, has also been externally relocated. Now you can access and change the filter without even opening the machine. 

 

 

 

 

Easily Accessible Battery and Jump Contacts:

 

The battery has been relocated to the top of the oil tank and now includes a set of quick contacts in case you need to charge or jump start the Bronco. This feature is particularly useful if the machine has been stored for a long period of time.

 

 

What else separates the Bronco line of ride-on floor strippers from the rest of the market?

 

With the Bronco’s patented Power Glide suspension system,the frame is articulated rather than wiggling the blade to keep the blade flat to the floor. This is much more efficient and makes for a faster, smoother ride when removing flooring.

 

Competitive strippers use gear pumps for their hydraulics. The Bronco uses hydrostatic pumps for its hydraulics. So why does that matter?

 

Gear pumps run at full power all the time.  

 

That means a pump that produces 9 gallons/min. at 3000 psi when running is always delivering 9 gallons/min. at 3000 psi. The Broncos hydrostatic pumps use only the oil flow and pressure that is required to do the work.

 

To reduce speed, you must shear the oil flow (divert the unused oil back to the reservoir).  This is done with servos/proportion valves.  In order to get reasonable operating power and control, the speed must be slowed down.

The Bronco’s hydraulic circuit is a closed loop circuit which means that the only oil that is returned to the oil reservoir is the blow-by from the pistons. There are no servos or proportion valves in the Bronco’s system.  The pumps are operated mechanically.

 

The diverted oil contains wasted energy in the form of heat which must be evacuated and which raises the ambient temperature of the work environment. 

 

Hydrostatic pumps run at much lower pressures which is a better use of energy and safer to operate. And the Bronco’s hydrostatic pumps have a positive auto-neutral return system that immediately returns the controls to neutral when released.  The neutral return is quick and accurate with no coasting. The machine comes to a quick, positive stop every time.

 

Gear pump driven equipment operates in a herky-jerky fashion.  When trying to move with precision, there is no initial response on the controls, and then suddenly the machine lurches forward. This erratic cadence puts walls and molding at risk. 

 

The Bronco’s controls in tight areas is very precise.  The controls are responsive even when moving inch by inch such as when boarding an elevator.

 

 

#260P.G2 Specs:

 

Length: 48”

Width:29”

Height: 44”

Weight: 1240lbs

Motor: 20HP 220V, single-phase, 3450 rpm

Blade action: fixed

Blade stroke: fixed

Warranty: 1 year

Speed: up to 400 ft./min.16

TAYLOR TOOLS

5045 PARIS STREET,  DENVER, COLORADO, U.S.A. 80239

(P) 303-371-7667 /(F)  303-371-7669

  • Facebook Social Icon
  • LinkedIn App Icon

© 2015 Created by GTD Limited. All Rights Reserved