FLOOR COVERING INSTALLATION AND CONCRETE SURFACE PREPARATION EQUIPMENT
#L154.335 LEISTER MINIFLOOR AUTOMATIC WELDER
With the MINIFLOOR Automatic Welder the field of use of the TRIAC can be expanded to countless applications. Turn your hot-air hand tool into an automatic welder in a matter of seconds!
Note: Hot air tool used in conjunction with MINIFLOOR Automatic Welder is sold separately.
Incredibly versatile - highest cost-benefit Ratio
The TRIAC hot-air tool and its entire nozzle range can be used both for manual welding, as well as with the MINIFLOOR Drive unit for automatic welding.
Investment is already worthwhile starting with welding lengths as short as four feet!
The sophisticated technology of the drive unit and the drive-sensors enable welding directly from the wall. There is only one required joint along the weld seam, and THAT saves time!
The 51 mm/2 inches minimum distance from the wall, ensures trouble-free welding around construction pipes and L-skirts.
Weighing in at 5.3 kg/12 lbs (6.6 kg/15 lbs including a TRIAC AT and nozzle) the MINIFLOOR is a lightweight solution among comparable welders and is easily transportable.
The quick-lock fastening system at the clamp allows for assembling / dismantling of the TRIAC in a matter of seconds. Thanks to the interchangeable inserts, older TRIAC models can be connected without a hitch.
Despite its lightweight design, the MINIFLOOR offers a welding speed of about 2 m/6.5 ft per minute, nearly double the speed of manual welding.